LP5
Disc pack couplingsThe LP5 heavy duty lamella clutch from R+W Couplings is a single flex design and is backlash-free for reversible loading. The clamp hub with double screw provides the clutch with high clamping force on the shafts. The design has high torsional rigidity and makes this lamella clutch very suitable for high-speed, reverse and intermittent loading. This industry slat coupling is used for infinite life under extreme conditions. For specific questions about slat couplings or other industry couplings, contact VARIODRIVE.
Implementation
Lamellar coupling with klemnaaf
Nom. Paddock
350 - 50.000 Nm
Speed
up to 11,200 rpm
Temperature range
-30 to +280 oC
Blade material
High elestic spring steel
Hub material
Steel
Peak load
Up to 2x nom. Paddock
Backlash
None
Service-life
No service
Optional
ATEX
Datasheets
- ATEX instructies
- Datasheet LP5
- Manual LP koppelingen
Tabel
| LP5 Series | 300 | 500 | 700 | 1100 | 1600 | 2600 | 4000 | 6000 | 8000 | 15000 | 25000 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Elastomer insert type | S | D | S | D | S | D | S | D | S | D | S | D | S | D | S | D | S | D | S | D | S | D | |
| Rated torque(Nm) | TKN | 350 | 500 | 700 | 1.1 | 1.6 | 2.6 | 4 | 6 | 8 | 15 | 25 |
| Maximum torque(Nm) | TKmax | 700 | 1 | 1.4 | 2.2 | 3.2 | 5.2 | 8 | 12 | 16 | 30 | 50 |
| Overall length | A | on request | 108 | 137 | on request | on request | 178 | 224 | 189 | 236 | 217 | _274 | on request | on request | 328 | 420 | 392 | on demand |
| Outside diameter(mm) | B1 | 99 | 109 | 128 | 133 | 150 | 168 | 198 | 212 | 238 | 299 | on demand |
| Outside diameter of hub(mm) | øB | 72 | 80 | 89 | 95 | 103 | 122 | 137 | 151 | 168 | 220 | on demand |
| Fit length(mm) | C | 43 | 52 | on request | on request | 85 | 90 | 102 | on request | on request | 155 | 183 |
| Inside diameter possible from Ø to Ø H7(mm) | D1/2 | 18-48 | 23-50 | 25-58 | 25-60 | 28-64 | 31-75 | 38-90 | 39-95 | 50-102 | 70-150 | on demand |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E | M8 | M8 | M10 | M10 | M12 | M12 | M16 | M16 | M20 | M24 | M36 |
| Tightening torque of the fastening screw(Nm) | 35 | 40 | 65 | 95 | 150 | 165 | 360 | 400 | 755 | 1200 | 72 | |
| Distance(mm) | G | — | 33 | — | 33 | — | 44 | — | 48 | — | 54 | — | 56 | — | 70 | — | 78 | — | 97 | — | 110 | — | on demand |
| Overall length(mm) | G1 | 50,3 | 59 | 50,3 | 68 | 66,4 | 84 | 66,4 | 94 | 77,5 | 113 | 77,5 | 119 | 100 | 140,8 | 110 | 151 | 132,5 | 174 | 155 | 212 | on demand |
| Fastening screw(ISO 4017) | H | 4xM6 | 4xM8 | 4xM8 | 4xM10 | 4xM12 | 4xM14 | 4xM14 | 4xM_16 | 4xM20 | 8xM20 | 8xM24 |
| Tightening torque of the fastening screw(Nm) | H | 18 | 34 | 39 | 73 | 120 | 192 | 246 | 395 | 615 | 680 | 1200 |
| Moment of inertia(10¯³kgm2) | Jges. | 2 | 3 | 4 | 5 | 8 | 11 | 11 | 15 | 20 | 27 | 38 | 50 | 75 | 103 | 106 | 145 | 207 | 279 | 658 | 904 | 1147 | on demand |
| Approximate weight(kg) | 2,5 | 1,8 | 3,7 | 2,8 | 6,0 | 4,3 | 7,4 | 5.5 | 10,6 | 8,4 | 15,1 | 12,0 | 22,5 | 17,3 | 28,4 | 21,9 | 43,4 | 33,8 | 80,3 | 61,2 | on demand | |
| Torsional stiffness(10³ Nm/rad) | CT | 120 | 60 | 160 | 80 | 260 | 130 | 300 | 150 | 420 | 210 | 580 | 290 | 940 | 470 | 1400 | 570 | 1600 | 800 | 2800 | 1400 | 5920 | 2960 |
| Axial ± (mm) | 0,5 | 1,0 | 0,6 | 10 | 0,7 | 1,5 | 0,8 | 1,5 | 1,0 | 2,0 | 1,1 | 2,0 | 1,3 | 2,5 | 1,3 | 2,5 | 1,3 | 2,5 | 1,5 | 3,0 | 1,5 | 40 | |
| Lateral ± (mm) | — | 0,2 | — | 0,2 | — | 0,3 | — | 0,3 | — | 0,4 | — | 0,4 | — | 0,5 | — | 0,5 | — | 0,6 | — | 0,7 | — | 0,8 | |
| Angular ± (degree) | max. | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,0 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 | 0,7 | 1,4 |
| Speed max. (rpm) | 5800 | 5300 | 4500 | 4300 | 3800 | 3400 | 2900 | 2700 | 2400 | 1900 | 1500 | |
| maximum speed(balanced) (1/min.) | 11200 | 10200 | 8700 | 8300 | 7400 | 6600 | 5600 | 5200 | 4700 | 3700 | 3 | |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | |
| 300 | 500 | 700 | 1100 | 1600 | 2600 | 4000 | 6000 | 8000 | 15000 | 25000 |
Downloads
- All
- Datasheets
- Manuals
- Datasheets
- Datasheets
- Manuals
Did you not find the right information?
Frequently Asked Questions
How can I place an order with VARIODRIVE?
You can place an order with VARIODRIVE by sending your request to orders@variodrive.nl. Your request will then be processed directly by our internal sales team.
Why should I choose a complete solution from VARIODRIVE?
By choosing VARIODRIVE’s complete solution, you won’t need to worry about integrating different drive components into the machine’s drive chain. We stand behind our complete solution and can guarantee its functionality.
Why should I choose VARIODRIVE's system warranty?
Due to our in-depth knowledge of our products and their integration into applications, we can provide a system warranty. At that point, we guarantee that the application will function using our motion control and traction solutions.
How can I download 3D drawings?
For most products on our website, you can download the 3D files. If the desired 3D file is not available, please contact sales@variodrive.nl, and we will send you the 3D file as soon as possible.
How can I download software?
You can download the necessary configuration software for most products on our website. For a few products, this might not be possible. In such cases, please contact sales@variodrive.nl, and we will assist you as soon as possible.
Have you found everything you need?
